Check OTS Performance
- IG Key "OFF".
- Disconnect OTS connector.
- Measure resistance between Pin No. 1 (signal) Terminal And Pin No. 2 (ground) terminal of the OTS. (Component Side)
Specification : Refer to OTS RESISTANCE SPECIFICATIONS
OTS RESISTANCE SPECIFICATIONSTemperature(°C/°F) Resistance (kΩ) -40°C (-40°F) 52.15kΩ -20°C (-4°F) 16.52kΩ 0°C (32°F) 6.0kΩ 20°C (68°F) 2.45kΩ 40°C (104°F) 1.11kΩ 60°C (140°F) 0.54kΩ 80°C (176°F) 0.29kΩ - Is the measured value within specification?
YES
- Go to "Verification Of VEHICLE REPAIR " procedure.
NO
- Carefully re-do this troubleshooting guide steps.
- If no problems were found with the circuits or connectors, replace the EOTS and go to "Verification Of VEHICLE REPAIR " procedure.