Repair Procedures: Removal: Notes

CAUTION:

Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.

Driver/Passenger Power Window Switch

Disconnect the negative (-) battery terminal.
Remove the front door trim.
(Refer to Body - "FRONT DOOR TRIM ")
Loosen the front door armrest (A) mounting screws.

Fig 1: Loosening Front Door Armrest Mounting Screws
Courtesy of KIA MOTORS AMERICA, INC.
Using a screwdriver or remover, separate the mounting clips and then remove the driver door module panel (A).

Fig 2: Locating Driver Door Module Panel
Courtesy of KIA MOTORS AMERICA, INC.
Loosen the mounting screws and then remove the driver door module(DDM) (A) after separating the mounting clips.

Fig 3: Loosening Driver Door Module Mounting Screws
Courtesy of KIA MOTORS AMERICA, INC.

CAUTION: Be careful not to damage the mounting clips.

Fig 4: Locating Mounting Clips
Courtesy of KIA MOTORS AMERICA, INC.