Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.

Turn ignition switch OFF.
Remove the battery and battery tray.
(Refer to "BATTERY ")
Disconnect the solenoid valve connector (A).

Fig 1: Disconnecting Solenoid Valve Connector
Courtesy of KIA MOTORS AMERICA, INC.
Measure the resistance between power terminal (3) and signal terminal (4).
Specification: Approx. 0.88 MΩ

Fig 2: Measuring Resistance Between Power Terminal (3) & Signal Terminal (4)
Courtesy of KIA MOTORS AMERICA, INC.