Repair Procedures: Installation
WARNING: This page is about a different variant/trim than selected.
- Install in the reverse order of removal.
- Adjust the alternator belt tension after installation.
(Refer to Engine Mechanical System - "DRIVE BELT ")
Alternator mounting upper bolt :
26.5 ~ 37.3 Nm (2.7 ~ 3.8 kgf.m, 19.5 ~ 27.5 Ib-ft)
Alternator mounting low bolt : 29.4 ~ 41.2 Nm (3.0 ~ 4.2 kgf.m, 21.7 ~ 30.4 Ib-ft)
Alternator brace mounting bolt :
24.3 ~ 26.9 Nm (2.48 ~ 2.74 kgf.m, 17.9 ~ 19.8 Ib-ft)