Component Inspection
WARNING: This page is about a different variant/trim than selected.
- Remove the ignition lock switch.
- Push the ignition lock switch in the direction of the arrow to make sure that continuity between terminals. (refer to the table below)
Standard Value:
Full stroke (A): 12.0 ± 0.3mm (0.4724 ± 0.0118 in.)
ON-OFF point (B): 2.0 mm (0.0787 in.)
Courtesy of KIA MOTORS AMERICA, INC.
Information
Condition Clutch Pedal Pressed Clutch Pedal Released Switch Operation ON (below 1.0Ω) OFF (Infinite Ω)