LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Forte5 LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Air Conditioning System) >> Compressor >> Troubleshooting >> Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Section 100 (Air Conditioning System): Compressor: Troubleshooting: Troubleshooting

WARNING: This page is about a different car, the 2017 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Troubleshooting Procedure Chart
G12335310Courtesy of KIA MOTORS AMERICA, INC.
Fault Code Fail Description Remedy
60 Compressor CAN signal fault
  1. Check HV, LV connector connection.
  2. Check LV connector pin condition.
  3. Check vehicle inverter fuse condition.
  4. A/C ON then check compressor operation.
  5. If it does not operate, replace compressor.
61 Compressor operation state error received
62 Low voltage
  1. Check HV connector connection.
  2. Check vehicle inverter fuse condition.
  3. Check voltage level of high voltage battery.
  4. A/C ON then check compressor operation.
  5. If it does not operate, replace compressor.
63 High voltage
  1. Identify vehicle model on compressor.
  2. Check voltage level of high voltage battery.
  3. A/C ON then check compressor operation.
  4. If it does not operate, replace compressor.
65 Overheat protection
  1. Check heating object in engine room.
  2. Check A/C system for defects.
  3. After 20 minutes, IG ON and A/C ON then check compressor operation.
  4. If it does not operate, replace compressor.
67 Over current protection
  1. Check cooling fan operation.
  2. Check AAF (Active Air Flap) for short circuit.
  3. After 20 minutes, IG ON and A/C ON then check compressor operation.
  4. If it does not operate, replace compressor.
69 Missed restart
70 Over torque protection
71 A/C on Operating Permission Not Received
  1. Check the BMS.
  2. Check the high voltage wiring shorted.
72 A/C Compressor Permission Power Not Received
68 Current Measurement Error
  1. If it does not operate, replace compressor.
  2. Check vehicle inverter
78 Compressor Interlock Circuit OPEN fuse condition.