LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Forte5 SX, Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L T >> Knock Sensor (KS) >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the cable from alternator "B" terminal (A).
    Fig 1: Alternator B Terminal
    G12161382Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the knock sensor bracket (A).
  4. Loosen the mounting bolt (B) and disconnect the connector (C).
  5. Remove the sensor from the cylinder block.
Fig 2: Knock Sensor Bracket, Connector And Mounting Bolt
G12161383Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals