LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (2 Of 3) (PHEV) >> DTC P0606-00: ECM/PCM Processor >> DTC Information >> DTC Detecting Condition
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy Case 1
  • Knock acquisition check
  1. Poor Connector Connection
  2. Unstable Power
  3. Faulty PCM
Case 2 * H-bridge (ETC, Port flap, wastegate) malfunction
* 5V power supply driver malfunction
* Power relay driver malfunction
* BARO. sensor malfunction
* Output driver malfunction
Enable Conditions Case 1
  • Engine speed during engine start is higher than 32RPM
Case 2
  • Ignition "ON"
Threshold Value Case 1
  • Internal ECU diagnostic
Case 2
  • Microcontroller communication error detected
    • H-bridge (ETC, Port flap, wastegate) malfunction
    • 5V power supply driver malfunction
    • Power relay driver malfunction- BARO. sensor malfunction
    • Output driver malfunction
Diagnostic Time Case 1 * 200 rev.
Case 2 * 1s
MIL On Condition
  • 2 Driving Cycles