Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery negative cable, and wait for at least three minutes before beginning to work.
Install the curtain airbag and then loosen the bolts and nuts.
Tightning torque

Bolts: 5.8 - 9.8 N.m (0.6 - 1.0 kgf.m, 4.3 - 7.2 lb.ft)

Nuts: 2.9 - 5.8 N.m (0.3 - 0.6 kgf.m, 2.1 - 4.3 lb.ft)

CAUTION: Never twist the airbag module when installing it. If the module is twisted, airbag module may operate abnormally.
Connect the curtain airbag connector.
Install the Roof trim.
(Refer to Body (Interior and Exterior) - "ROOF TRIM ASSEMBLY ")
Reconnect the battery negative cable.
After installing the curtain airbag (CAB), confirm proper system operation:

Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.