LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Sedona L >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Body Control Module Diagnosis) >> DTC B163E-00: Rain Sensor Module LIN Fault >> Wiring Inspection >> Power Circuit Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Circuit Inspection

WARNING: This page is about a different car, the 2018 Kia Cadenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition "OFF".
  2. Disconnect Rain Sensor connector.
  3. Ignition "ON".
  4. Measure voltage between Pin No. 1 (Memory Power) terminal of Rain Sensor harness connector and chassis ground.

    Specification  : Approx. 12V

  5. Is the measured value within specification?

    YES 

    NO 

    • Repair open or short in power circuit between Rain Sensor and Battery and then go to "VERIFICATION OF REPAIR " procedure.
scientia non olet · About LEMON Manuals