LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Sedona L >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Automatic Transaxle Control System) >> Input Speed Sensor >> Repair Procedures >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2017 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Remove the battery and battery tray.

    (Refer to Engine Electrical System - "BATTERY ")

  3. Disconnect the solenoid valve connector (A).
    Fig 1: Disconnecting Solenoid Valve Connector
    G12274721Courtesy of KIA MOTORS AMERICA, INC.
  4. Measure the resistance between power terminal (14) and signal terminal (8).

    Specification:  Approx. 0.88 MΩ

    Fig 2: Measuring Resistance Between Power Terminal (14) And Signal Terminal (8)
    G12274722Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals