Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Take care not to scratch the crash pad and related parts.

Disconnect the negative (-) battery terminal.
Remove the glove box housing.
(Refer to Body - "GLOVE BOX HOUSING ")
Remove the multi box assembly (A) after loosening the screw.

Fig 1: Locating Multi Box Assembly Screw
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the blower motor connector (A) and clip (B).

Fig 2: Locating Blower Motor Connector & Clip
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the BCM & Receiver unit connectors (A).

Fig 3: Locating BCM & Receiver Unit Connectors
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the mounting clip (A) and then remove the receiver (B) after loosening the nut.

Fig 4: Locating Mounting Clip
Courtesy of KIA MOTORS AMERICA, INC.
Remove the BCM & Receiver unit (A) after loosening the nuts.

Fig 5: Locating BCM & Receiver Unit With Nuts
Courtesy of KIA MOTORS AMERICA, INC.