Neutralization Status Check

WARNING: This page is about a different car, the 2018 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.

Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
After IGN ON, select the "Neutralization mode".

Fig 1: Screen Display - Neutralization Mode (1 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 2: Screen Display - Neutralization Mode (2 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Screen Display - ECM Neutralization (1 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 4: Screen Display - ECM Neutralization (2 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 5: Screen Display - SMK Neutralization (1 Of 3)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 6: Screen Display - SMK Neutralization (2 Of 3)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 7: Screen Display - SMK Neutralization (3 Of 3)
Courtesy of KIA MOTORS AMERICA, INC.