Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Turn ignition switch OFF and disconnect the negative (-) battery terminal.
Remove the battery.
(Refer to "BATTERY ")
Remove the air cleaner assembly.
(Refer to "AIR CLEANER ")
Disconnect the ECM Connector (A).
Remove the ECM & bracket (B) after loosening the mounting bolt and nuts,
ECM bracket mounting bolt/nut:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 1: Locating ECM Or Bracket And ECM Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the ECM after loosening the mounting nuts and screws from the ECM & bracket.