Repair Procedures: Replacement

Remove the shift lever knob & boots assembly (A) by Pulling in the upside.

Courtesy of KIA MOTORS AMERICA, INC.
Remove the floor console assembly.
(Refer to "FLOOR CONSOLE ASSEMBLY ")
Disconnect the shift lever switch connector (A).

Courtesy of KIA MOTORS AMERICA, INC.
Remove the wiring fastener (A) from the shift lever assembly.

Courtesy of KIA MOTORS AMERICA, INC.
Separate the lever pin (B) and then remove the shift cable (A).

Courtesy of KIA MOTORS AMERICA, INC.
Remove the shift lever assembly (B) by loosening the bolts (A).
Tightening torque:

1.0 ~ 1.4 kgf.m

Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.
NOTE: When installing, set room side shift lever and T/M side lever to "N" position.