LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2018 >> Stinger Base, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Liftgate System >> Power Liftgate Module >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

CAUTION:
  1. After replacing with a new power liftgate module, check for DTC code at all times.

    If DTC code B24B0 exists, perform power liftgate mode change.

    (Refer to " TROUBLESHOOTING  ") 

  2. After replacing with a new power liftgate module, perform the system initialization.

    (Refer to " TROUBLESHOOTING  ") 

  3. Before delivery to customer, operate the power liftgate to be sure that there is no warning sound.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the luggage side trim [LH].

    (Refer to " LUGGAGE SIDE TRIM  ") 

  3. Disconnect the power liftgate module connectors (A).
    G12798697Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the power liftgate module (A) after loosening the mounting nuts.
    G12798698Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals