LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Cadenza Technology >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (4 Of 6) >> DTC P050B-00: Cold Start Ignition Timing Performance >> DTC Inspection >> Monitor KDS/GDS Data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Monitor KDS/GDS Data

  1. Connect KDS/GDS to Data Link Connector (DLC).
  2. Ignition "ON", Engine "ON" (Cold condition)
  3. Check the "Current Data" about related DTC with KDS/GDS.
  4. Is the parameter displayed within specification?

    YES 

    • Fault is intermittent caused by poor contact in the sensor's and/or ECM's connector or was repaired and ECM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "Verification Of REPAIR " procedure.

    NO 

scientia non olet · About LEMON Manuals