LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Forte FE, Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System Diagnosis (2 Of 6) >> DTC P016C-00: Closed Loop Air/Fuel Ratio Control At Limit-System Too Lean >> DTC Inspection >> Monitor DTC Status
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Monitor DTC Status

Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS to Data Link Connector (DLC).
  2. Monitor "Diagnostic Trouble Codes (DTC)" with KDS.
Figure below.
G12850988Courtesy of KIA MOTORS AMERICA, INC.

Active Fault 

History/Pending Fault