July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Circuit Inspection

G13209220

Courtesy of KIA MOTORS AMERICA, INC.

G13209221

Courtesy of KIA MOTORS AMERICA, INC.

Inspection Condition	(+) Probe		(-) Probe		Specification
Inspection Condition	Connector	Terminal	Connector	Terminal	Specification
Ignition "ON".	BCM connector	19 (C-CAN high)	Chassis ground	-	Figure below
Ignition "ON".	BCM connector	20 (C-CAN low)	Chassis ground	-	Figure below

G13209222

Courtesy of KIA MOTORS AMERICA, INC.

Good

Fault might be intermittent and caused either by poor contact in connectors or wiring harness, or it has been repaired and control module memory is not cleared yet. Thoroughly check terminal of battery, all connectors (and connections) for looseness, bending, corrosion, contamination, deterioration, and/or damage.
Repair or replace as necessary and then go to "VERIFICATION OF REPAIR " procedure.

No Good

Repair open or short in circuit and then go to "VERIFICATION OF REPAIR " procedure.