Repair Procedures: Installation
WARNING: This page is about a different variant/trim than selected.
NOTE:
- Install the component to the specified torque.
- Note that internal damage may occur if the component is dropped. If the component has been dropped, inspect it before installation.
- When cleaning the throttle body, clean the valve and carbon at the bore with the cloth wet with the cleaner.
- Do not spray the engine cleaner on the throttle body.
- Be careful that fingers or cloth are not caught in the valve.
- When installing the throttle body, make sure that foreign materials do not enter the throttle body.
- Install in the reverse order of removal.