Repair Procedures: Installation
WARNING: This page is about a different variant/trim than selected.
- Install in the reverse order of removal.NOTE:
- Be careful not to damage other hose when tightening the clamp. tightening the clamp.
- Install the clamp in the specified direction to prevent interference with surrounding components.
- Perform the resolver calibration using the KDS.
(Refer to Hybrid Motor Control System - "RESOLVER SENSOR ")
- Refill the hybrid cooling system with coolant and bleed air from the hybrid cooling system using KDS. (Refer to Hybrid Motor Cooling System - "COOLANT ")
- Confirm that there is no fluid leakage on connections after repairing.