Repair Procedures: Replacement
CAUTION:
- Put on gloves to protect your hands.
- Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury
NOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
- Take care not to bend or scratch the trim and panels.
- Remove the front seat back cover.
(Refer to Front Seat - " FRONT SEAT BACK COVER ")
- Remove the front seat cushion cover.
(Refer to Front Seat - " FRONT SEAT CUSHION COVER ")
- Install in the reverse order of removal.