LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Sedona L >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Engine Control System) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

WARNING: This page is about a different car, the 2020 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Remove the air cleaner assembly.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the ETC Module connector (A).
  4. Disconnect the coolant hoses (B).
  5. Remove the ETC module (D) after loosening the mounting bolts (C).

    Electronic throttle body mounting bolt: 

    14.7 - 24.5 N.m (1.5 - 2.5 kgf.m, 10.8 - 18.1 lb.ft)

    G13044217Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals