LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Sedona L >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Engine Control System) >> Oil Pressure Sensor (OPS) >> Repair Procedures >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2020 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch "OFF" the ignition.
  2. Disconnect the OPS connector.
  3. Remove the OPS.
  4. After immersing the thermistor of the sensor into engine coolant, measure resistance between the OPS terminals 2 and 4.
  5. Check that the resistance is within the specification.
    Pressure (Bar) Output Voltage (V) [Vref=5V]
    0 0.46 - 0.54
    2 1.25 - 1.35
    4 2.05 - 2.15
    6 2.84 - 2.96
    10 4.42 - 4.58
scientia non olet · About LEMON Manuals