LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Sorento L >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Airbag Modules And Clock Spring) >> Driver Airbag (DAB) Module >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different car, the 2020 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal.
    NOTE: After disconnecting the negative battery terminal, wait at least 30 seconds.
  2. Cover the cluster/dash area using a large shop towel and adjust steering wheel height and pull out (telescopic) to avoid damage.
  3. Turn steering wheel to left and right to access the top two access ports (A); adjust the tab holes to access the internal pushrod release, push flathead towards steering column to release the pushrod and locking tab, then remove the airbag module (B).
    G12858646Courtesy of KIA MOTORS AMERICA, INC.
    G12858647Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the horn connector (A) and airbag module connectors (B).
    G12858648Courtesy of KIA MOTORS AMERICA, INC.
    CAUTION: The removed airbag module should be stored in a clean, dry place with the pad cover facing up.
scientia non olet · About LEMON Manuals