LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Heater System) >> Mode Control Actuator >> Repair Procedures >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2018 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the main crash pad assembly.

    (Refer to Body - "MAIN CRASH PAD ASSEMBLY ")

  3. Remove the BCM (Body Control Module) cluster.

    (Refer to Body Electrical System - "BODY CONTROL MODULE (BCM) ")

  4. Disconnect the connector (A) and then remove the mode control actuator (B) after loosening the mounting screws.
    G12598067Courtesy of HYUNDAI MOTOR AMERICA
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals