Verification of Vehicle Repair
WARNING: This page is about a different car, the 2018 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.
After repair, it is essential to verify whether the faults have been corrected.
- Connect the GDS and select the "Diagnostic Trouble Codes(DTC)" mode.
- Erase the DTCs and test the vehicle according to the DTC Setting Condition in DTC Information.
- Did the same DTC return?
YES
- Go to the applicable troubleshooting procedure.
NO
- The system is running properly in line with the specifications at this time.