Automatic Transaxle System DTCS
WARNING: This page is about a different car, the 2018 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.
AUTOMATIC TRANSAXLE SYSTEM DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| DTC P0601 | 00: Internal Control Module Memory Check Sum Error |
| DTC P0705 | 00: Transmission Range Sensor Circuit Malfunction |
| DTC P0706 | 00: Shift Cable alignment error between TGS Lever and Transmission Range Sensor |
| DTC P0711 | 00: Transmission Fluid Temperature Sensor 'A' Circuit Range/Performance |
| DTC P0712 | 00: Transmission Fluid Temperature Sensor 'A' Circuit Low Input |
| DTC P0713 | 00: Transmission Fluid Temperature Sensor 'A' Circuit High Input |
| DTC P0717 | 00: Input/Turbine Speed Sensor 'A' Circuit No Signal |
| DTC P0722 | 00: Output Speed Sensor Circuit No Signal |
| DTC P0729 | 00: Gear 6 Incorrect Ratio |
| DTC P0731 | 00: Gear 1 Incorrect Ratio |
| DTC P0732 | 00: Gear 2 Incorrect Ratio |
| DTC P0733 | 00: Gear 3 Incorrect Ratio |
| DTC P0734 | 00: Gear 4 Incorrect Ratio |
| DTC P0735 | 00: Gear 5 Incorrect Ratio |
| DTC P0741 | 00: Torque Converter Clutch Circuit Performance or Stuck Off |
| DTC P0743 | 00: Torque Converter Clutch Circuit Electrical |
| DTC P0748 | 00: Pressure Control Solenoid Valve(VFS) 'A' Electrical |
| DTC P0753 | 00: Shift Control Solenoid Valve 'A' Electrical (UD/B) |
| DTC P0758 | 00: Shift Control Solenoid Valve 'B' Electrical (2-6/B) |
| DTC P0763 | 00: Shift Control Solenoid Valve 'C' Electrical (35R/C) |
| DTC P0768 | 00: Shift Control Solenoid Valve 'D' Electrical (OD/C) |
| DTC P0773 | 00: Shift Control Solenoid Valve 'E' Electrical (SS-A) |
| DTC P0880 | 00: TCM Power Signal Error Open/Short (GND) |
| DTC P0955 | 00: Auto Shift Manual Mode Circuit |
| DTC P2709 | 00: Shift Control Solenoid Valve 'F' Electrical (SS-B) |
| DTC U0001 | 00: High Speed CAN Communication Bus off |
| DTC U0100 | 00: Lost Communication With ECM/PCM 'A' |