Open Maximum Programming (Garage Position)
- After mechanical End Position is learned, the basic position defined by user will be regarded as same as the maximum basic position.
- The user may shift the learned basic position to any position. (within the range between Maximum position For Closing and Maximum Basic Position)
- If the user wishes to move the new basic position lower than the old basic position, he or she has to move the liftgate to the new position automatically or manually and push the internal switch of the liftgate for five seconds. (Time may differ in accordance with parameters.)
- If the user wishes to set the liftgate position above the maximum basic position, ECU will set the basic position as the maximum basic position.