Repair Procedures: Disassembly
WARNING: This page is about a different car, the 2020 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the bolt (A) and then disconnect the universal joint assembly from the steering column assembly.
Tightening Torque:
49.0 - 58.8 N.m (5.0 - 6.0 kgf.m, 39.8 - 43.4 lb-ft)
 Courtesy of HYUNDAI MOTOR AMERICA
|
NOTE:
- Do not reuse the universal joint bolt.
- Reassembly is the reverse of the disassembly.
NOTE:
- When assembling, match the gear teeth as the below image.
 Courtesy of HYUNDAI MOTOR AMERICA
|