Repair Procedures: Removal
WARNING: This page is about a different car, the 2024 Kia K5. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the MDPS assembly.
(Refer to " Removal ")
- Disconnect the MDPS System connector (A).
Information
Disconnect the connector in the following order.
- Remove the MDPS System (A) after loosening the mounting bolts.
Tightening torque:
8.0 -12.0 N.m (0.8 - 1.2 kgf.m, 5.9 - 8.8 lb-ft)