Inspection Procedure
□ Inspect leak air or stuck
- Inspect a contamination, gasket and installation.
- Damaged or installation of throttle body
- Damaged or installation of intake manifold and gasket which is installed in surge tank
- Contamination and stuck in intake manifold
- Contamination between surge tank and PCSV and stuck open
- Damaged or contamination of O2S (up)
- Visual check leak a catalyst and a exhaust system of O2S (down)
□ Inspect fuel line
- Inspect a stuck, a contamination, a installation.
- Check fuse line connection
- Check a installation of line, poor or damaged
- Damaged or cracked pipe
- Inspect a contamination of fuel filter
Good
- Go to "Wiring Inspection " procedure.
No Good
- Repair as necessary and Go to "VERIFICATION OF REPAIR " procedure.