4WD Control System DTCS
4WD CONTROL SYSTEM DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| DTC P1951 | 00: AWD ECU-S/W Fault |
| DTC P1952 | 00: AWD ECU-H/W Fault |
| DTC P1953 | 00: AWD ECU-Motor Driver Fault |
| DTC P1954 | A2: AWD ECU-Voltage Fault |
| DTC P1955 | 11: AWD Motor-Circuit Fault |
| DTC P1955 | 12: AWD Motor-Circuit Fault |
| DTC P1955 | 13: AWD Motor-Circuit Fault |
| DTC P1956 | 11: AWD Pressure sensor-Power Line Fault |
| DTC P1956 | 12: AWD Pressure sensor-Power Line Fault |
| DTC P1957 | 21: AWD Pressure sensor-Signal Error |
| DTC P1957 | 22: AWD Pressure sensor-Signal Error |
| DTC P1958 | 00: AWD-Torque Error |
| DTC P1959 | 00: AWD-Clutch Thermal Stress too high |
| DTC P1960 | 00: AWD-Bleeding Pressure Error |
| DTC P1961 | 00: AWD-Install Different Tire Front/Rear |
| DTC P1962 | 00: AWD-Unmatching Vehicle CAN Information |
| DTC U0001 | 88: High Speed CAN Communication Bus |
| DTC U0100 | 87: Lost Communication with ECM/PCM 'A' |
| DTC U0101 | 87: Lost Communication With TCM |
| DTC U0122 | 87: Lost Communication With Vehicle Dynamics Control Module |
| DTC U0126 | 87: Lost Communication With Steering Angle Sensor Module |