LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2021 >> Telluride EX, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transfer Assembly) >> Transfer Fluid >> Repair Procedures >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.

Information 

  1. Remove the under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")

  2. Remove the oil filler plug (A).
    G13310509Courtesy of KIA MOTORS AMERICA, INC.
  3. Check the oil level.

    Information 

    • Oil level must be up to fill the hole, if not, add oil until it runs over.
    G13310510Courtesy of KIA MOTORS AMERICA, INC.
  4. Install the oil filler plug with new gasket.

    Tightening torque: 

    39.2 - 58.8 N.m (4.0 - 6.0 kgf.m, 28.9 - 43.4 lb-ft)

  5. Install the under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")