Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Prior to replacing the AWD ECU, check the AWD ECU's clutch learning with the KDS tool.
(Refer to AWD Control System - "ADJUSTMENT ")
Disconnect the battery negative cable from the battery.
Remove the luggage side trim. (LH side)
(Refer to Body - "LUGGAGE SIDE TRIM ")
Disconnect the AWD ECU connector (A).

Courtesy of KIA MOTORS AMERICA, INC.
Remove the AWD ECU (A) after loosening the mounting nuts.

Tightening torque:

9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

Courtesy of KIA MOTORS AMERICA, INC.