Position Sensor: Installation: Installation

WARNING: This page is about a different car, the 2024 Kia Carnival. However, it is still accessible from the selected car via links, so may be relevant.

Check that the gear is shifted to "N".

Courtesy of KIA MOTORS AMERICA, INC.
Install the position sensor (A).

Courtesy of KIA MOTORS AMERICA, INC.

NOTE: Lightly tighten the position sensor mounting bolts so that necessary adjustments can be made.
Install the SST (09459 - 4G100).

Courtesy of KIA MOTORS AMERICA, INC.
After tightening the bolts (B) to the specified torque, remove the position sensor "Position sensor neutral fixed jig" (A) (09459 - 4G100).
Tightening torque:

9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

Courtesy of KIA MOTORS AMERICA, INC.
Install the electronic shift actuator.
(Refer to Automatic Transaxle Control System - "ELECTRONIC SHIFT ACTUATOR ")