Engine Control Module (ECM): Adjustment
WARNING: This page is about a different car, the 2024 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.
Information
Perform inspecting procedure by using the KDS as below order.
- Perform the "Key Teaching" procedure by using the KDS.
Turn IG ON then OFF using the smart key or start button. Then the ECM learns information on the smart key automatically.
- Perform the VIN writing procedure by using the KDS.
(S/W Management → Engine Control → Write VIN)
Information
Refer to the KDS screen for operating conditions and details
- Perform the Electronic Throttle Control (ETC) module learning procedure.
(Refer to Engine Control System - "ELECTRONIC THROTTLE CONTROL (ETC) MODULE ")