| DTC Strategy |
|
- Poor connector connection
- Open in signal circuit
- HO2S (Bank1, Sensor2)
|
| Enable Conditions |
- Sensor ceramic temperature is greater than 620°C (1148°F)
- Sensor forced stimulation active
- When the downstream oxygen sensor heating time is more than 80 seconds, it is in the maximum heating or normal heating state
- Normal 12V battery voltage (10 to 16V)
- Sensor element resistance is less than 1KΩ
|
| Threshold Value |
- Oxygen sensor element resistance is greater than 24KΩ
|
| Diagnostic Time |
|
| MIL ON Condition |
|