Repair Procedures: Installation
WARNING: This page is about a different car, the 2025 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
- Install in the reverse order of removal.
NOTE:
- Install the component with the specified torques.
- Note that internal damage may occur when the component is dropped. In this case, use it after inspecting.
- Apply the engine oil to the O-ring.
- Insert the sensor in the installation hole and be careful not to damage when installation.
- Be careful not to damage the sensor housing and the connector.
- Be careful not to damage the O-ring.