Repair Procedures: Removal
WARNING: This page is about a different car, the 2025 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
- Disconnect the engine coolant temperature sensor connector (A).
- Remove the sensor (B).
Engine coolant temperature sensor:
29.4 - 39.2 N.m (3.0 - 4.0 kgf.m, 21.7 - 28.9 lb.ft)
NOTE: Note that engine coolant may be flowed out from the water temperature control assembly when removing the sensor.