DTC Information: DTC Detecting Condition

Item		Detecting Condition	Possible Cause
DTC Strategy		Controller malfunction check failure of controller operation	Poor connection PCM Programming error
Enable Conditions	Case 1	Battery voltage is at between 10 and 16V Ignition "ON"
	Case 2	Engine speed is lower than 32 RPM
	Case 3	Battery voltage is at between 10 and 16V Engine speed is lower than 32 RPM
	Case 4	Ignition "ON"
Threshold Value	Case 1	Error bit information from HW circuit checksum failure
	Case 2	Integrity of the knock acquisition is not correct
	Case 3	Power stage output for port flap has over temperature
	Case 4	Microcontroller communication error detected
Diagnostic Time	Case 1	10s
	Case 2	200 revolutions
	Case 3	0.4s
	Case 4	1s
MIL ON Condition		2 driving cycles