Inspection Procedure
■ Inspect whether to leak air or stuck
- Inspect a contamination, gasket and installation
- Damaged or installation of throttle body
- Damaged or installation of intake manifold and gasket which is installed in surge tank
- Contamination and stuck in intake manifold
- Contamination between surge tank and PCSV and stuck open
- Damaged or contamination of O2S (up)
- Visual check leak a catalyst and a exhaust system of O2S (down)
■ Inspect whether to fuel line
- Inspect a stuck, a contamination, a installation
- Check fuse line connection
- Check a installation of line, poor or damaged
- Damaged or cracked pipe
- Inspect a contamination of fuel filter
Good
- Go to "WIRING INSPECTION " procedure.
No Good
- Repair as necessary and Go to "VERIFICATION OF REPAIR " procedure.