Service Point Calibration (SPC): Notes
NOTE:
Perform the camera calibration in the following cases.
Check the items below before performing the camera calibration.
- If the front view camera is removed and mounted
- If the front view camera is replaced with a new one (* EOL Variant Coding and calibration required for new replacement).
- If the front view camera coupler of the windshield glass is deformed.
- If the windshield glass is changed.
- When a failure code (System Out of Calibration) occurs.
Check the items below before performing the camera calibration.
- Check for vehicle alignment and tire pressure for accurate camera calibration.
- Windshield must be clean and free of any dirt or object.