Front View Camera: Installation
WARNING:
- When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
- When working on the high voltage system or related components, be sure to observe and be aware of the HIGH VOLTAGE SYSTEM GENERAL SAFETY INFORMATION AND CAUTION . If not, it may cause serious accidents due to electric shock or short circuit.
- When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and HIGH VOLTAGE SHUT-OFF PROCEDURES .
NOTE:
- Ensure the front camera windshield area is clean from any debris or contaminants prior to reinstalling the front camera.
- Install it firmly so that it makes a "click" sound.
- Install in the reverse order of removal.
- If the front view camera is replaced with a new one, perform the "VARIANT CODING " procedure using KDS.
(Refer to Front View Camera Unit - "ADJUSTMENT ")