Removal & Installation: Installation
- Install in reverse order of removal.NOTE:
- Install the battery sensor to the specified torque.
- If the battery is dropped, it may cause internal damage. (Do not reuse)
- When installing the battery, fix the clamp on the tray correctly.
- When installing the battery (-) terminal, be sure to observe the specified torque before tightening. When tightening with excessive torque, the circuit inside the PCB of the battery sensor and the battery terminals may be damaged.
- When replacing the battery, be sure to replace it with the same specification (capacity, manufacturer, etc.) as the battery installed originally. When the different specification is installed, it may be determined that the battery performance is abnormal by the battery sensor.