Charging System: Battery: Cleaning
- Remove the battery.
(Refer to Battery - "REMOVAL AND INSTALLATION ")
- Inspect the battery tray for damage caused by the loss of electrolyte. If acid damage is present, it will be necessary to clean the area with a solution of clean warm water and baking soda. Scrub the area with a stiff brush and wipe off with a cloth moistened with baking soda and water.
- Clean the battery upper face with sodium bicarbonate.
- Inspect the battery case and cover for cracks, and if cracks are found, the battery should be replaced.
- Clean the battery posts with a suitable battery post tool.
- Clean the inside surface of the terminal clamps with a suitable battery cleaning tool. Replace damaged or frayed cables and broken terminal clamps.
- Install in the reverse order of removal.