| DTC Strategy |
Case 1 |
- Check accuracy of time measurement during engine running by engine-off timer μC
|
- Poor connector connection
- Poor battery condition
- Faulty ECM
|
| Case 2 |
- Check engine-off timer start increment during power latch
|
| Enable Condition |
Case 1 |
- Engine speed during engine start is faster than 608 to 960 RPM
- Elapsed time after engine starts is more than 3s
- Battery voltage is 10V to 16V
|
| Case 2 |
|
| Threshold Value |
Case 1 |
- Time difference between engine-off timer time measurement (ES timer μC) and engine running timer (main μC timer) is greater than 35% + 10s
|
| Case 2 |
- Deviation of engine-off timers after ignition switch turned off is shorter than 2s
|
| Diagnostic Time |
Case 1 |
|
| Case 2 |
|
| MIL ON Condition |
|