LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2000 >> Discovery >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine, Ignition System, & Fuel System Sensors & Switches >> Computerized Engine Controls >> Electronic Control Module >> Removal & Installation (Discovery Series II)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation (Discovery Series II)

Disconnect negative battery cable. Remove passenger side kick panel and remove "A" post lower trim. Remove 2 nuts and ECM from studs. Lower ECM into footwell, disconnect 5 connectors and remove ECM. To install, reverse removal procedure. Using TestBook/T4, program ECM and reset adaptations.