LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2000 >> Discovery >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Coolant Rail Mounting Bolt 16 (22)
Cylinder Block Drain Plug (Discovery Series II) 22 (30)
ECT Sensor (Discovery) 15 (20)
Fuel Feed Pipe Fitting 12 (16)
Fuel Filter Fittings
Except Range Rover 22 (30)
Range Rover 15 (20)
Fuel Pump Lock Ring
Advanced EVAP System 26 (35)
Pre-Advanced EVAP System 35 (48)
Fuel Temperature Sensor 13 (17)
Generator Mounting Bolts 33 (45)
Heated Oxygen Sensor
Front (Discovery) & Rear (All) 15 (20)
Front (Discovery Series II & Range Rover) 33 (45)
Intake Manifold Bolt
Discovery 28 (38)
Discovery Series II & Range Rover 16 (22)
Knock Sensor 16 (22)
Plenum Chamber-To-Ram Housing Bolt 18 (24)
Ram Housing-To-Manifold Bolt 18 (24)
SAI Air Injection Pipe Unions 18 (24)
Third Row Seat Belt Mounting Bolt 37 (50)
Third Row Seat Mounting Nuts & Bolts 16 (22)
INCH Lbs. (N.m) 
Camshaft Position (CMP) Sensor Bolt 71 (8)
Crankshaft Position (CKP) Sensor Bolt 53 (6)
ECT Sensor 89 (10)
Fuel Pressure Regulator Screw 89 (10)
Fuel Rail Bolts 80 (9)
Idle Air Control Valve Clamp Screw 71 (8)
Ignition Coil Bracket Bolt 71 (8)
Intake Air Temperature Sensor 71 (8)
Radiator Drain Plug 53 (6)
Secondary Air Injection (SAI)
Control Valve-To-Engine Manifold Bracket Bolts 89 (10)
Air Pump-To-Mounting 89 (10)
Vacuum Reservoir-To-Mounting Bracket Bolt 89 (10)
Throttle Bracket Bolt 71 (8)
Throttle Position Sensor Screw 18 (2)