Cruise Control Servo Cable: Service and Repair

Service repair no - 19.75.10

Remove







1. Disconnect inner cable from actuator.
2. Release cable from actuator mounting bracket.







3. Release cable from 2 support clips.







4. Loosen cable locknuts, release cable from abutment bracket.
5. Release inner cable from operating lever and remove cable.

Refit
6. Position cable and connect to operating lever.
7. Position cable to abutment bracket.
8. Fit cable to support clips.
9. Fit cable to actuator mounting bracket and connect inner cable to actuator.
10. Adjust cruise control cable. Adjustments